SPEKTRA Concrete Protect
Calculation of consumption:
m2
0
l
2
* Consumption is calculated per one coat
Technical documentation
Safety data sheet
Are you not sure which product to choose?
SPEKTRA Concrete Protect is water-based and used for the decoration and protection of exterior and interior concrete surfaces. It is used for painting vertical and low-wear floor areas (socles, stairs, floors in boiler rooms and basements, etc.).
Properties:
- single-component, water-soluble
- CO2 diffusion-resistance
- easy to apply
- resistant to water uptake
- good mechanical and chemical resistance (fuel oil, motor oil, water solution of salt, usual cleaners)
- easy maintenance
Consumption:
1 l covers 6–8 m2 of surface in 1 coat
Packaging units:
Detailed information is available in the technical data sheet.
Colour shades:
White and 3 standard colour shades.
Tip:
We recommend you to read the technical information before using the product. The product must not freeze, store at a temperature between +5 °C and +35 °C and do not expose to direct sunlight. Do not pour the product into the sewage system.
Instructions for use:
-
Interior and exterior wall and floor surfaces
-
Mix before use
-
Thinning with water up to a max. of 5 %
-
Application with a roller or brush
-
Cleaning tools with water
-
Drying time between individual coats: 8-12 h
-
Working conditions 10-25 °C
-
Gloss level - matt